Exalto Emirates Trade Catalogue 2024

Paint &protection Product Information Finish/Sheen : Semi-Gloss Biocide content : 4.5% Copper content : 42% (all Colours) Recommended coats : 2 heavy coats on entire hull and 3 at waterline and other high wear areas Theoretical coverage : 331 Sq.Ft./Gal. @ 3 mils DFT Typical Film Thickness Pleasure craft : 3.0 mils dry film thickness (DFT) per coat, (5.0 mils wet film thickness (WFT)) Commercial craft : 4.0-5.0 mils DFT per coat by spray application (7.0- 8.0 Mils WFT) Islands 77 Plus was developed as an alternative to tin-based antifouling paints to protect against the harshest marine environments. Using the newest biocide technology, a revolutionary polymer binder system “PL3” produces an engineered dual biocide release that leaves no harmful effects on the environment. The result is a multi-season self-polishing paint that provides equivalent protection to tin-based formulas. Features and Benefits • Advanced dual biocide PL3 release technology for longer life • Harder, self-polishing polymer binding system • Highest grade of cuprous oxide available • Better colour consistency for colour matching • Provides fouling protection equivalent to TBT type products Islands 77 Plus - Advanced Dual Biocide, Tin-Free Part number Colour Size Weight 13.04.0025 Black 1 Gallon 7.3 kg 13.04.0026 Light Blue 1 Gallon 7.3 kg 13.04.0170 Grey 1 Gallon 7.3 kg Application controls Method : Airless spray, conventional spray, solvent resistant rollers and brushes Application data Mixing : Islands 77 antifouling paint contains a moderate concentration of copper oxide and may have settled in transit. Product must be thoroughly mixed with power mixer/shaker until uniform. Thinning : If necessary, maximum 10% Sea Hawk 2033, 2035 Cleaning : Cleaning Sea Hawk 2033, 2035, Xylene Brush/rolling : Solvent Resistant Roller Cover 3 ⁄ 8 ” pile (nap), smooth to medium. Prewash roller cover to remove loose fibers prior to use. Airless spray : Minimum 33:1–2 GPM ratio pump; “0.017-0.026” orifice tip; 3 ⁄ 8 ” ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter. Safety : Safety: Prior to use, obtain and consult the “Material Safety Data Sheet” of this product for health and safety information. Read and observe all precautionary notices on container labels. Application controls Method : Brush, roller or spray Application data Mixing Thinning : Islands 44 TF antifouling paint contains a low concentration of copper oxide and may have settled in transit. Product must be thoroughly mixed with power mixer/shaker until uniform. : If necessary, maximum 10% with Sea Hawk 2053 Reducer Brush/rolling : Solvent Resistant Roller Cover 3 ⁄ 8 ” pile (nap), smooth to medium. Prewash roller cover to remove loose fibers prior to use. Airless spray : Minimum 33:1–2 GPM ratio pump; “0.017-0.026" orifice tip; 3 ⁄ 8 " ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter. Safety : Prior to use, obtain and consult the "Material Safety Data Sheet" of this product for health and safety information. Read and observe all precautionary notices on container labels. Islands 44 TF is an advanced tin-free self-polishing antifoulant that will keep your hull bottom smooth and free of organic growth over multiple cruising seasons. This revolutionary new coating employs dual-biocide technology via a unique controlled release resin system, premium quality copper, and additives which combine to yield maximum protection from all types of marine growth. Islands 44 TF comes with a 1-Year Limited Warranty when applied by a Certified Sea Hawk Applicator. Features and Benefits • Dual-Biocide Antifouling (High purity Cuprous Oxide combined with pharmaceutical-grade Econea®) protects against both hard and soft growth preventing barnacles and slime from degrading boat hulls • PL4 Self-polishing copolymer resin technology is compatible with virtually every solvent-based bottom paint and dries to a durable, glossy sheen • Controlled Release Formulation ensures biocides are dispersed at a precise rate independent of water type and complies with California copper leach rate restrictions • High Solids Volume Content maximizes surface coverage while reducing paint usage and application time • Highest level of antifoulant protection available • Highest quality grade of cuprous oxide available (more potent active ingredient) Islands 44 TF - Advanced Dual-Biocide for Application Directly Over Tin-Based Note: Available on request. Please contact Exalto emirates 13 Boat care, adhesives &protection 1252