Exalto Emirates Trade Catalogue 2024

Pumps, plumbing& sanitary Maceratorpumps Macerator pump 240V This heavy duty macerator pump is self priming and has a dual voltage 110/240 volt 50 Hz ac motor making it ideal for heavy duty commercial applications on larger craft - or for dock side waste pump out. 53LPM capacity at open flow empties waste tanks in a short time. Self primes to 4 ft (1.2m) • 53 1itres per minute flow (14 GPM) at open flow • 44 litres per minute flow (12 GPM) at 3 metre head • Thermal overload protected motor Inlet port size Discharge port : 38 mm Barbed and 1½” NPT threaded : 25 mm (1”) hose Barb Part number Description 04.14.0037 Dual 110/240 Volt Other Applications Black Maximum running period Connections Discharge head Dimensions : 15 min/hour : suction: 2” - discharge: 1” : 5 m : L x w x h = 270 x 125 x 140 mm Macerator pump (Type F) Designed to empty holding tanks. As the pump is not self-priming, it is important to be fitted either at the lowest part of the tank or lower than the tank itself. Made of bronze with brass impellers and a stainless steel shaft. Easy and quick to take apart for maintenance or service. Part number Volt Capacitymax. (lpm) Ampere Weight (kg) 04.14.0029 12 70 40 4.5 04.14.0030 24 70 20 4.5 Other Applications Black Run-drymacerator waste pump The latest version of the Macerator Pump now has a fully sealed motor and a new more powerful chopper blade. The sealed motor consists of o-ring sealed end bells, sealed bearings and a hard durable powder coating to prevent corrosion occurring both internally and externally. A new four bladed chopper has been added to further reduce the possibility of clogging. The pump still has the Run- Dry feature present in previous models. • Triple sealed motor to prevent both interna land external motor corrosion. • New four-bladed chopper reduces clogging. • Detects the absence of fluid then shuts-off pump before impeller is damaged. • Sensor provides adequate run-dry period to allow initial priming of the pump. • Flow rate 12 gpm (45 lpm). • Self-priming to 4 ft (1.2 m) vertical lift. • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition protection). Fitting Sizes : Inlet port: 1½” (38 mm) hose barb plus 1½” NPT. Inlet port, RV model: 3” (75 mm) hose discharge port: 1” (25 mm) hose barb. : 11⅜” Long x 4¾” wide x 3⅝” high (29 cm x 12 cm x 9 cm). RV model is only 8¼” (21 cm) long. 2.3 kg Part number Description 04.14.0025 12V dc Pump, Marine model. 04.14.0026 24V dc Pump, Marine model. Other Applications Black Grey Maximum running period Connections Discharge head Dimensions : Unlimited : suction: 2” - discharge: 1” : 6 m : L x w x h = 390 x 180 x 140 mm Macerator pump (Type F S370) Designed to empty large holding tanks. Holding tank capacity should be about 1 m3. As the pump is not self-priming, it is important to fit the pump either at the lowest part of the tank or lower than the tank itself. Made of bronze and stainless steel. Easy to take apart. Part number Volt Ampere Capacitymax. (lpm) Weight (kg)t 04.14.0031 12 40.0 60 9 04.14.0032 24 28.0 60 9 04.14.0033 230 2.5 50 8 04.14.0034 400 1.0 50 8 Other Applications Black 04 343