Exalto Emirates Trade Catalogue 2024

Standard battery switches Batteryswitches&distributionpanel Contour batterymaster switch • The 701 Contour Battery Master Switch offers a number of unique features, the highlight being the patented Contour Locking System, allowing it to be a stand alone unit, or locked together with other switches. • Features a control knob which cannot be removed while in the ON or OFF position, however, can be removed by switching to an counter-clockwise 45° position. The control knob also features an interchangeable labeling system allowing a full range of applications (Models 713 or 715: 136). • Removable side plates on 4 sides for access of up to 1/0 cables plus a rear cover insulating the rear terminals against any short circuits. This ensures the switch meets ABYC requirements. • Can be either surface or recess mounted by cutting a 2.1” (52 mm) hole. Part number Model L xWx H (mm) Current rating (dc) Voltage (V dc) Operation Stud size Studs x (mm) Continuous Intermittent Cranking 08.10.0001 701 69 x 69 x 75 275 455 1250 48 On/Off 2 x 10 Battery selector switch The 701S is the most compact selector switch available on the market. Housed in the same dimensions as the 701, and includes the same removable side plates and back cover. While BEP recommends isolated battery systems as outlined with BEP distribution clusters, the 701S offers a simple economical way of separating two batteries. Part number Model L xWx H (mm) Current rating (dc) Voltage (V dc) Operation Stud size Studs x (mm) Continuous Intermittent Cranking 08.10.0002 701S 69 x 69 x 75 200 300 1000 48 1-2-Both-off 3 x 8 Easyfit™battery switch Following customer feedback about installations where switches need to be recessed through varying thicknesses of panels, BEP developed the 700 Easyfit™ switch. It achieves this through an easily removable threaded ring allowing for panel thicknesses up to ¾” (19 mm). It uses the same features as the 701 with the removable key 45° past the off position, labelled handle and a removable back cover covering exposed terminals to meet ABYC specifications. The switch can also be surface mounted offering a unique style compared to other switches available on the market. The 700 Easyfit™ switch can easily be retro - fitted in place of most European post and lever type switches. Part number Model L xWx H (mm) Current rating (dc) Voltage (V dc) Operation Stud size Studs x (mm) Continuous Intermittent Cranking 08.10.0003 700 68 x 68 x 110 275 455 1250 48 On/Off 2 x 10 Panel-mounted switches • Compact, lightweight • Removable knob on 701-PM • Countersunk recesses for surface mount application • Standard 2 1 ⁄ 16 ” (52 mm) hole cut out (same as standard gauge hole) • Inside: captive inserts for 3 ⁄ 16 ” (4.8 mm) nuts; full access for cables - no restrictions • Standard BEP™ interchange label system (see 136) 701-PM 701S-PM Part number Model L xWx H (mm) Current rating (dc) Voltage (V dc) Operation Stud size Studs x (mm) Continuous Intermittent Cranking 08.10.0004 701-PM 69 x 69 x 75 275 455 1250 48 On/Off 2 x 10 08.10.0005 701S-PM 69 x 69 x 75 200 300 1000 48 1-2-Both-off 3 x 8 *Note: For dual bank selector switches, both banks must be of some voltage! 08 Electrical 746