Exalto Emirates Trade Catalogue 2024

Gauges Ampmeter Available in 63 mm diameter. Scale calibration: +/- 50 A, 80 A or 150A. Suitable for both 12 VDC and 24 VDC. Part number Model Colour Scale calibration Volt Cut-out size 10.01.0119 AMP050B Black +/- 50A 12/24 Ø 52 mm 10.01.0120 AMP050N Cream +/- 50A 12/24 Ø 52 mm 10.01.0121 AMP050W White +/- 50A 12/24 Ø 52 mm 10.01.0122 AMP080B Black +/- 80A 12/24 Ø 52 mm 10.01.0123 AMP080N Cream +/- 80A 12/24 Ø 52 mm 10.01.0124 AMP080W White +/- 80A 12/24 Ø 52 mm 10.01.0125 AMP150B Black +/- 150A 12/24 Ø 52 mm Voltmeter a c b Can be supplied for 12V or 24V dc. Scale calibration respectively: 8 -16 V and 16 -32 V. Part number Model Colour Volt Cut-out size 10.01.0025 VLT12B Black 12V(10-16V) Ø 52 mm 10.01.0028 VLT24B Black 24V(20-32V) Ø 52 mm 10.01.0026 VLT12N Cream 12V(10-16V) Ø 52 mm 10.01.0029 VLT24N Cream 24V(20-32V) Ø 52 mm 10.01.0027 VLT12W White 12V(10-16V) Ø 52 mm 10.01.0030 VLT24W White 24V(20-32V) Ø 52 mm a a c c b b Ammeter a b Scale calibration: ± 60 A, for 12V or 24V dc, with shunt incorporated. This ammeter is also available with scale calibration of ± 100 A, with a separate shunt. ± 80 A on request please contact Exalto Emirates. Part number Model Colour Volt Cut-out size 10.01.0020* AMPW Cream 12/24 V (±50 A) Ø 52 mm 10.01.0023** AMP0150N Cream 12/24 V (±150 A) Ø 52 mm 10.01.0021* AMPWL White 12/24 V (±50 A) Ø 52 mm 10.01.0024** AMPSWL White 12/24 V (±100 A) Ø 52 mm 10.01.0108* AMP150W White 12/24 V (±150 A) Ø 52 mm b b a a b *Has built in shunt. **With a separate shunt. Exhaust temperature alarm Designed for wet exhaust systems. Provides a visual and an audible alarm when the temperature inside the exhaust hose or the muffler exceeds an acceptable level. The temperature sensors, to be fitted into the exhaust hose or the waterlock/muffler and the alarm unit must be ordered separately. In the case of a twin engine installation 2 sensors may be connected to 1 alarm unit, if so required. One sensor may also serve two alarm units, e.g. in the case of a second steering position. a c For suitable sensor please refer page 137. b Part number Model Colour Volt Cut-out size 10.01.0016 XHI12B Black 12 V Ø 52 mm 10.01.0084 XHI24B Black 24 V Ø 52 mm 10.01.0017 XHI12W Cream 12 V Ø 52 mm 10.01.0085 XHI24W Cream 24 V Ø 52 mm 10.01.0018* XHI12WL White 12 V Ø 52 mm a a c b b *Until stock lasts! Oil pressure gauge Available for 12V or 24V dc Scale calibration 0-8 kg/cm² and 0-110 psi. Oil pressure sensors are available as an optional equipment (see page 1007). a c b Part number Model Colour Volt Cut-out size 10.01.0109 OILB Black 12/24V(0-8 kg/cm²) Ø 52 mm 10.01.0110 OILN Cream 12/24V(0-8 kg/cm²) Ø 52 mm 10.01.0033* OIL12WL White 12V(0-8 kg/cm²) Ø 52 mm 10.01.0036 OILW White 12/24V(0-8 kg/cm²) Ø 52 mm a c c b *Until stock lasts! 10 Monitoring& control 992