Exalto Emirates Trade Catalogue 2024

Sensors Float for waste water tanks The arm length is adjustable between 200 and 412 mm.. Part number Model 10.09.0004 WWSENSORA All Vetus tank level indicators arematched with Vetus tank senders and can be connected directly to each other to give an accurate reading. To connect non-Vetus level indicators to a Vetus tank sender, it is necessary to install a 10.09.0066 signal converter in the circuit. Float for fuel tanks Float for application in all rigid petrol and diesel fuel tanks with a height between 140 and 660 mm. Both the vertical strip and the horizontal float arm are completely adjustable. Add resistance: 240 Ω to 44 Ω. All Vetus tank level indicators arematched with Vetus tank senders and can be connected directly to each other to give an accurate reading. To connect non-Vetus level indicators to a Vetus tank sender, it is necessary to install a 10.09.0066 signal converter in the circuit. Part number Model 10.09.0005 FSENSOR Sensor for GD1000&PD1000 gas detector Part number Model Description 10.09.0061 PSENSOR For petrol vapour detector type PD1000, incl. 5 m cable. 10.09.0062 GSENSOR For gas detector type GD1000 incl 5 m cable To connect non-Vetus level indicators to a Vetus tank sender, it is necessary to install a signal converter in the circuit. Part number Model 10.09.0066 EP46849 Signal converter Liquid level senders (resistive with reedmatrix, withwire) Part number L (cm) Part number L (cm) 10.09.0024* 27 10.09.0084* 140 10.09.0025* 28 10.09.0054* 150 10.09.0041* 58 10.09.0085* 160 10.09.0078* 68 10.09.0086* 170 10.09.0045* 75 10.09.0087* 180 10.09.0079* 78 10.09.0088* 190 10.09.0046* 80 10.09.0050* 95 10.09.0052* 110 10.09.0080* 118 10.09.0081* 130 10.09.0082* 135 10.09.0083* 137 250/10Ω Liquid level senders are level indicating devices compatible with all the petrol and water level gauges available on the market. They are fuel, sea-water and acid resistant because they are made of the highest stainless steel AISI 316. They are perfectly watertight and have a flange with holes that allows a perfect fitting on the tank. The sender cables must be connected to the measuring terminals of the indicating instruments *Until stock lasts! 10 Monitoring& control 1013