Exalto Emirates Trade Catalogue 2024

Provides an accurate indication of the current, amperage, remaining time and remaining capacity of battery bank 1, and the current and estimated capacity of battery banks 2 and 3. The built-in microprocessor calculates the remaining capacity and stores historic data. Masterlink BTM-III batterymonitor Part number Model 10.02.0021 70403163 Specifications Number of battery sets : Service (fully), starter & bowthruster Max. amp-hour capacity : 9999Ah Voltage read-out : yes Current read-out : yes Amp-hours read-out : yes Time remaining indication : yes Battery capacity in % : yes Current consumption (backlight off) : 14 mA/12V - 11 mA/24V Current consumption (backlight on) : 100 mA/12V - 50 mA/24V Supply voltage : 9-35V dc Voltage range measurement : 7-35V dc Voltage resolution : 0.01V Voltage deviation : ± 0.6% ± 1 figure Amps measurement range : 0-500A (optional 1000A/50mV) Shunt specification : 500A / 50mV (included) Dimensions instrument, wxh : 4.7” x 2.6” / 120 x 65 mm Built-in depth incl./excl. cover box : 2.2”/1.6” / 55/40 mm Weight instrument incl. shunt : 2 lbs / 0.9 kg Dimensions shunt, hxwxd : 3.3” x 1.7” x 1.7” / 84 x 44 x 44 mm - M8 Part number 10.02.0022 10.02.0023 10.02.0024 Model 21709150 21709200 21709300 Fits in battery charger Mass 24/25-2 DNV Mass 24/50-2 Mass 24/75, Mass 24/100, Mass24/100-3ph Supply voltage 8-32 V DC 8-32 V DC 8-32 V DC Supply current 110mA(@12V) / 65mA(@24V), Normal operation mode without activated relays Weight in kg 1.1 kg 1.1 kg 1.1 kg Professional users will benefit from a front display with GMDSS alarm functions. GMDSS stands for Global Maritime Distress and Safety System, an internationally agreed-upon set of safety procedures, types of equipment, and communication protocols that is a requirement for the SOLAS (Safety Of Life At Sea) convention and uses DSC and satellite communication. Battery voltage and current are displayed on the digital panel. GMDSS front panels Panels Advanced battery monitor, 12/24V DC with LCD readout and remote control for Mass Sine inverter, Mass battery charger or Mass Combi. The Masterlink MICC will tell you at a glance: • Exact state-of-charge of your battery. • System voltage and system charge- or discharge current. • Amp-hours consumed from the battery. • Time of operation remaining until your battery is empty. • Remote operation of your inverter, your battery charger or Mass Combi. MasterlinkMICC batterymonitor Part number Model 10.02.0025 70403105 Specifications Number of battery outlets : 2; service (fully), starter (voltage) Display/read-out : voltage, current, amp-hours, time remaining, battery capacity in %, inverter & charger operation, Power Sharing, special battery status events Languages on display : English Built-in depth : 55/40 mm Dimensions, hxwxd : 65 x 120 x 40 mm Dimensions shunt, hxwxd : 84 x 44 x 44 mm Weight : 0.25 kg 10 Monitoring& control 997